How to Solve Nintendo Switch Console Charge Error
The Nintendo Switch console does not seem to charge, or the battery charge continues to go down despite being connected to the AC adapter. The console battery does not last very long despite charging for several hours.Normally the Nintendo Switch Console takes about 3 hours to fully charge when the console is turned off or in sleep mode. But if in the charging life condition will run much longer. When fully charged, under normal conditions the battery duration can last about 3 hours. However this will vary depending on the application and function of the software you are using.
Nintendo Switch Console Charge Error Fix
The first way to resolve a non-functioning console charger:
First: Turn off the console and rearrange the AC adapter by unplugging it from both ends. Then leave unplugged and set aside 30 seconds.
Next we will unplug the charger, verification model No. HAC-002 that the original in use. Please note if the resources used are different, or if the original is damaged, we only need to replace it with an official Nintendo accessory this already can solve the problem that happened, for that you can buy from Online Store.
Second: You need to connect the original adapter to the console and try to plug it directly into a power outlet. When the Nintendo Switch adapter is plugged into the console, the LCD screen will turn on and the battery charging indicator will be displayed in the top right corner of the screen. If the battery power is running low when Nintendo adapter is plugged first, the screen will stay off and the charging indicator will be displayed briefly in the upper-left corner of the LCD screen. Allow the console to fill at least 15 to 30 minutes, then press the POWER button to boot.
The Nintendo Switch Console Has No Power, Has a Blank Screen, or Will not Wake Up From Sleep Mode
In contrast to certain cases that may be Nintendo Switch screen is empty or not lit, and while in the handheld mode or table mode LCD screen is empty.
After that put the console in sleep mode, make sure the console will not wake up when the POWER or HOME button is pressed.
In this condition, the Console usually does not have a power light. then place on the dock, the LCD screen will turn off automatically when the software application
will be displayed on the TV screen.
The second way to overcome a non-functioning console charger:
First: With the undocked console, you need to install the Joy-Con controller.
Second: You need to reset the AC adapter by letting it detach from both ends for at least 30 seconds. Please note when performing this step, you use the Nintendo Switch AC adapter with model No. HAC-002 and check out the pieces, kinks, frilled wires, and accessories.
Third: Connect the adapter directly to the console.
Nintendo Switch Problems
Now we will see what Nintendo Switch problems answer will be displayed by Console:
1.The Entrance Screen
- If the login screen is displayed, let the console fill out and ensure the latest Nintendo switch system update is installed.
2. Only the Battery Charge Indicator
- If the battery power in the console is low when is plugged in first, the screen stays off and the charging indicator is displayed briefly in the upper left corner of the LCD screen. Let console fill at least 15 to 30 minutes, then press the POWER button to boot.
- After booting up, make sure the latest system update console is installed.
- If the console has been allowed to fill in enough time, but will not boot up, follow the steps for "Screen Powerless or Stay Empty."
4. The Screen Did Not Power On or it Remains Blank
If you got these problems here our tips and tricks to resolve Nintendo Switch problems, follow these guide:
- Hold down the POWER switch for twelve seconds to force the console closed, then turn it back on.
So very easy solve Nintendo switch console charge error, hopefully this article can help you to have fun with your family.